EMG 4467 Extra Heavy-Duty Giant Water Repellent Lifting Bag - 1,100L

£2,039 .02 Excl. VAT £2,446.82 incl. VAT

Brand: EMG SKU: LH-2957

Possible to attach a pallet underneath
Made from a heavy water repellent tarpaulin
Stainless steel buckles
4 lifting straps

Read complete description

Click on Your Preferred Pack Size:

Variant

Quantity:

£10,256.50 £2,100.42 excl. VAT

EMG 4467 Extra Heavy-Duty Giant Water Repellent Lifting B... - £2,039.02 excl. VAT

BIGBEN® UltraLite Vented Safety Helmet - £61.40 excl. VAT

A giant bag for giant loads.

With a SWL of 1000kg and a capacity of 1,100L, the Extra Heavy Duty Giant Water Repellent Lifting Bag is a lifting gamechanger.

This particular model was designed and constructed with heavy involvement from the offshore windmill industry. The main function of this giant bag is to fit an entire EU pallet inside and therefore lower the amount of lifts required.

Buy your Extra Heavy Duty Giant Water Repellent Lifting Bag today from Leach's.

Bottom cover material	Acrylonitrile Butadiene Styrene (ABS) Plastic
Buckles material	Plastic
Dimensions closed	130 x 90 x 110 cm (L x W x H)
Dimensions open	130 x 90 x 110 cm (L x W x H)
Lifting height	200 cm
Main fabric	Tarpaulin 0.75 mm
Original packaging	1 units
Slings / ribbon material	50 mm Polyamide
Special features	Water repellent
Upright included	Yes
Volume	1100 L
WLL	1000 KGS
Weight	50 KGS

NOTE: The bag is NOT sold with a pallet
It is possible to attach a pallet underneath the bag for easier movement on the ground. This is done by guiding polyamide ribbons underneath the bag and pallet and through stainless steel buckles
The bag is shipped with a large rain cover to be used when placed on a ship or stored outside for longer periods
Made from a heavy tarpaulin material making it strong and water repellent
Uses 4 lifting straps which are made of high quality polyamide webbing
Stainless steel buckles are used to tighten and strengthen the walls of the bag
The lid is closed by velcro and 50mm plastic buckles around the sides of the bag
The front of the bag can be opened, folded and used as a ”gate” making it easier to fill the bag and making it possible to place an entire pallet inside using a fork lift
A plastic tube is placed inside the top of the ”gate” for rolling the fabric
The front opens by zippers on each side
A removable velcro patch for easy logo printing is placed on the front of the bag
A transparent plastic pocket for A4-documentation or markings is placed in each end of the bag. The pockets are attached by velcro and can be easily removed
The bottom cover is made of PEHD plastic to prolong the lifespan of the bag and offer excellent weight distribution
Hard plastic plates are placed inside the walls of the bag
A 20 mm PVC plate is placed inside the bag to offer protection and weight distribution
The walls can be taken out and placed in the bottom of the bag to lessen the space consumption of the bag when transporting or storing it
The bottom cover is detachable and can be replaced